HI-3200 / HI-3201

The HI-3200 / HI-3201 from Holt Integrated Circuits is a single chip CMOS data management IC capable of managing, storing and forwarding avionics data messages between eight ARINC 429 receive channels, four ARINC 429 transmit channels and a single CAN / ARINC 825 data bus.

The ARINC 429 and ARINC 825 (CAN) buses may be operated independently, allowing a host CPU to send and receive data on multiple buses, or the HI-3200 can be programmed to automatically re-format, re-label, re-packetize and retransmit data from ARINC 429 receive buses to ARINC 429 transmit buses, as well as from ARINC 429 to ARINC 825 (CAN) or the other way around.

A 32K x 8 on-board memory allows received data to be logically organized and automatically updated as new ARINC 429 labels or ARINC 825 (CAN) frames are received.

An auto-initialization feature allows configuration information to be up-loaded from an external EEPROM on reset to facilitate rapid start-up or operation without a host CPU.

The HI-3200 interfaces directly with Holt’s HI-8448 octal ARINC 429 receiver IC, HI-8596 or HI-8592 ARINC 429 line drivers and HI-3110 integrated ARINC 425 (CAN) controller / transceiver.

The HI-3201 is identical to the HI-3200 except it comes in an 80-pin PQFP package with eight instead of two ARINC 429 bit monitor pins.

Features

  • Eight ARINC 429 Receive channels
  • Four ARINC 429 Transmit channels
  • ARINC 825 / CAN Bus interface
  • 32KB On-chip user-configurable data storage memory
  • Programmable received data filtering for ARINC 429 and ARINC 825 (CAN) buses
  • Programmable Transmission schedulers for periodic ARINC 429 and ARINC 825 (CAN) message broadcasting
  • Flexible protocol bridge for ARINC 429 to ARINC 825 (CAN) and ARINC 825 (CAN) to ARINC 425
  • Serial Peripheral Interface (SPI) (20MHz)
  • Auto-initialization feature allows power-on configuration or independent operation without a CPU
  • ARINC 429 Loopback self-test mode
  • RAM Built-in self-test (BIST)
  • Industrial (-40°C to +85°C) and Extended (-55°C to +125°C) temperature ranges supported. 

Applications

  • Avionics Data Management, Storage & forwarding
  • ARINC 429 to ARINC 825 (CAN) Bridge
  • CMOS/TTL to ARINC Level Conversion
  • CMOS/TTL to RZ & NRZ Level Conversion
Part #Package DescriptionTemp RangeFlowMoisture Sensitivity LevelRoHS Compliant
HI-3200PQI64 Pin Plastic Quad Flat Pack (LQFP)-40°C to +85°CI3No
HI-3200PQIF64 Pin Plastic Quad Flat Pack (LQFP)-40°C to +85°CI3Yes
HI-3200PQT64 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CT3No
HI-3200PQTF64 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CT3Yes
HI-3200PQM64 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CM3No
HI-3200PQMF64 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CM3Yes
HI-3200PCM64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-55°C to +125°CM3N/A
HI-3200PCMF64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-55°C to +125°CM3Yes
HI-3200PCTF64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-55°C to +125°CT3Yes
HI-3200PCT64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-55°C to +125°CT3N/A
HI-3200PCI64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-40°C to +85°CI3N/A
HI-3200PCIF64 Pin Plastic 9mm x 9mm Chip-Scale Package (QFN)-40°C to +85°CI3Yes
HI-3201PQIF80 Pin Plastic Quad Flat Pack (LQFP)-40°C to +85°CI3Yes
HI-3201PQTF80 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CT3Yes
HI-3201PQMF80 Pin Plastic Quad Flat Pack (LQFP)-55°C to +125°CM3Yes
Picture of ADK-3200: HI-3200 Avionics Data Management Engine Evaluation Board
ADK-3200: HI-3200 Avionics Data Management Engine Evaluation Board
The Holt HI-3200 Data Management Evaluation Board demonstrates most of the features of the HI-3200 ARINC 429 – CAN Bus Bridge. The HI-3200 features 8 ARINC 429 receive channels, 4 ARINC 429 transmit channels and a CAN Bus / ARINC 825 interface.
Downloads
Data Sheets
Demo Kit Quick Start Guide
Demo Kit User Guide
Software Guide